It means the temperature is too low (LL), or too high (HH). I wrote to Infant Optics about the LL and HH in the temperature reading location, this was their answer.
Is the Infant Optics thermometer accurate?
The camera can be remotely controlled to the pan (355 degrees) and tilt 120 degrees so you can adjust its angle conveniently. A review said that the temperature on the Hello Baby is surprisingly accurate.
How do I adjust the volume on my baby optics monitor?
Press the A UP button or 7 DOWN button to select the desired volume level from level 1 ~ 8 (The default volume level setting is level 4).
Why is my Infant Optics monitor beeping?
Loud Beeping Noise
Causes of noise may be due to low battery, alarm ring alert, or out of signal alert. The Camera and Monitor Unit may be too far away and out of range.
Can you connect infant optics to phone?
Unlike others in this price category, the Infant Optics parent unit gives you the ability to pan, tilt and zoom the camera. … You can find a monitor that has a larger screen or can also work with your iPhone or Android device once you move past the $200 mark but this checks off all requirements in its price category.
How do I reset my baby optics monitor?
lf the Camera Unit is too far away with low reception, move the Camera Unit closer to the Monitor Unit. Reset both units by disconnecting them from battery and electrical power. Wait about 15 seconds, then reconnect.
How do I change my Summer Infant monitor from F to C?
Temperature Monitoring: Monitoring the temperature in baby’s room is easy with the option to display it on screen and helps parents know baby is comfortable. Switch between Fahrenheit and Celsius by pressing and holding the Video On/Off button for 4-seconds.
How do I change from owlet to Fahrenheit?
Towards the bottom of the screen you’ll see a button that says Temperature Unit. Tap on this button and then you’ll be able to choose between Fahrenheit and Celsius.
How do I change my infrared thermometer from Celsius to Fahrenheit?
How to change infrared thermometer from celsius to fahrenheit
- Step 1: Make sure the thermometer is off.
- Step 2: Press and hold the power button, and after about 5-7 seconds, the display screen will come back in turn: “℃/SET, ℉/SET”.
Does infant optics camera have to be plugged in?
Do the cameras need to be plugged in or do they have battery power? Answer: … The camera cannot.