If the well water contains nitrates (above a level of 10 mg/L), it should not be used for infant formula or food preparation. Instead, you should prepare food or formula by using purchased water, public water supplies, or water from deeper wells with minimal nitrate levels.
What type of water do you mix with baby formula?
You can use any type of clean water — tap or bottled — to prepare liquid-concentrate or powdered formula. If you’re concerned about the purity of your water supply, talk to your baby’s doctor or your water provider. Many public water systems will test drinking water upon request.
What can I use instead of distilled water for baby formula?
You may use city water or regular bottled drinking water for use in making formula if you boil it first. (Picture 2). Run the cold water for 2 minutes to flush the water pipes.
Is filtered well water OK for Baby?
Mixing up a bottle of baby formula isn’t too hard, but knowing which water source should go into the formula can be a challenge. Bottled water may seem to be the safest bet, but it turns out that filtered tap water may be a safer source. Bottled water can contain contaminants and high levels of sodium.
What kind of water should babies drink?
According to the American Dental Association it won’t affect the health of teeth—and may even make teeth more resistant to decay. “Drinking plain water is one of the healthiest habits you can start with baby,” Altmann says.
What is better distilled or purified water for baby formula?
Purified water or distilled water is recommended for infant formula feeding. … According to the Mayo Clinic’s hospital website, the American Dental Association does not recommend mixing formula with fluoridated tap water; it can create enamel fluorosis, which develops while teeth are forming in the gums.
Is purified water the same as distilled water?
Distilled water is a type of purified water that has had both contaminants and minerals removed. Purified water has had chemicals and contaminants removed, but it may still contain minerals. … Distillation boils the water, and then condenses the steam back into a liquid to remove impurities and minerals.
What happens if you don’t boil water for formula?
Water that hasn’t been boiled can also contain bacteria. Formula therefore needs to be made up with water hot enough to kill the bacteria, which is at least 70 degrees C. This means boiling the kettle and leaving it to cool for no longer than 30 minutes, so that it remains at a temperature of at least 70 degrees C.
Can you make formula with boiling water?
The U.S. Food and Drug Administration recommends boiling water for one minute and letting it cool, or following the manufacturer’s label. … Overall, formula cans recommend boiling water for one minute, letting it cool to room temperature around 75 degrees Fahrenheit (about 24°C) and adding powder.
What bottled water is safe for formula?
To lessen this chance, parents can use low-fluoride bottled water some of the time to mix infant formula; these bottled waters are labeled as de-ionized, purified, demineralized, or distilled, and without any fluoride added after purification treatment.
Can newborns have well water?
Formula and food prepared with well water can cause nitrate poisoning in infants, leading the American Academy of Pediatrics (AAP) to issue a warning for families using wells for their drinking water.